Search
View our Range of Temperature, Humidity and Co2 Sensor Transmitters with various outputs for Building Management Systems (BMS)
View our Range of Temperature, Humidity and Co2 Sensor Transmitters with various outputs for Building Management Systems (BMS)
Set of Sensors for Universal Air Conditioner Control Systems. Consists of 1 X Coil Sensor and 1 X Return Air Sensor
Vat Included.
The Vector SRA-Tn10 Indoor Wall Mounted Temperature Sensor with a NTC Probe (10k ohm @ 25 Deg C) Temperature Range is -70 ...... 150 deg C Available in different sensor options, please see Spec Sheet for ordering codes
Vat Included.
The Vector SRC-T1 Wall Mounted Temperature Transmitter Sensor has options of 0-10V / 2-10V / 0 - 20mA / 4-20mA outputs configurable by jumpers. The Sensor Temperature Range is -40 ...... 60 deg C
Vat Included.
The Vector SRC-H1Tn10-A3 Indoor Wall Mounted Humidity Transmitter with Temperature Sensor has options of 0-10V / 2-10V / 0 - 20mA / 4 -20mA output for humidity configurable by jumpers and a NTC Temperature Probe.
Vat Included.
The Vector SRC-C1 Indoor Wall Mounted Co2 Transmitter has an option of 0 - 10V / 2 - 10V / 0 -20mA / 4 -20mA Output with a 0 - 2000ppm Range Can be used a Proportional Fresh Air Controller or Direct Control of an Extract Fan Display module available.
Vat Included.
The Vector SRC-H1-A3 Indoor Wall Mounted Humidity Transmitter has an option of 0-10V / 0-20mA / 4 -20mA Output Configurable by jumpers
Vat Included.
The Vector SOD-Tn10-1 is a Outdoor Temperature with a NTC probe.
Vat Included.
The Vector SOC-T1-1 is an Outdoor Wall mounted Temperature Transmitter with an option of 0-10V / 4 = 20mA Output Configurable via jumpers.
Vat Included.
The Vector SOC-H1-A3-1 is an Outdoor Wall mounted Humidity Transmitter with an option of 0-10V / 4 = 20mA Output Configurable via jumpers. This transmitter needs to be connected to a controller with a 0-10V input to control humidity as listed in Controllers - Analogue Inputs in the Category menu.
Vat Included.
The LAE Universal Wall Mounted Humidity Sensor HT2WAD with 0-10V Output This sensor needs to be connected to controller with a 0-10V input as listed in Controllers - Analogue Inputs in the Category menu.
Vat Included.
The Vector SDB-Tn10-12-W-1 is a Duct Mounted Temperature Sensor which can also be used as an Immersion Sensor by fitting an AMI Stainess Steel Pocket (Available in different lengths) Please see Spec Sheet for specific ordering codes
Vat Included.
EVCO EVTPN615F200 NTC Temperature Probe, thermoplastic lead, 6 x 15mm overmoulded tip. Range -40 to 110 Deg C Suitable for all EVCO NTC Controllers.
Vat Included.
EVCO EVTPJ815V200 J Type Thermocouple, 1.5m Steel Braded Lead, 6 x 100mm Stainless Steel tip. Range 0 to 350 Deg C Suitable for most J Type Controllers.
Vat Included.
EVCO EVTPJ830V200 J Type Thermocouple, 3m Steel Braded Lead, 6 x 100mm Stainless Steel tip. Range 0 to 350 Deg C Suitable for most J Type Controllers.
Vat Included.
The Trend T/PS Wall Mounted Space Temperature Transmitter Sensor has an 4-20mA output. The Temperature Range is -10 ...... 40 deg C
Vat Included.